@article { author = {EFTEKHAR ARDEBILI, AHAD and REZAZADEH, MARYAM and MALAKOOTI, HOSEIN}, title = {Synoptic Studying Of the Effective Dust Storms on Persian Gulf (Case Study: Dust Storms in 2013)}, journal = {Journal of Meteorology and Atmospheric Science}, volume = {2}, number = {1}, pages = {42-54}, year = {2019}, publisher = {Iran Meteorology Society (IMS)}, issn = {2645-7261}, eissn = {2645-727X}, doi = {}, abstract = {The dust production in the deserts in the periphery of Persian Gulf and the transferring and dispersion of it towards Persian Gulf is investigated based on observatory methods and simulation using the mesoscale WRF-CHEM Model and GOCART scheme; The dust storm that influenced the Persian Gulf were most predominantly originated from Iraq and Saudi Arabia. The origin of this storm is the formation of a low-pressure on the Jordanian land and its movement from the northwest of Iraq to the southeast and turn it into a high-pressure hub in the southwest of Iran, which increases the surface wind speed at the station Basra Iraq up to 25 meters per second and lead to the formation of a dust mass and its upward movement. In the following days, this dust mass has moved towards Saudi Arabia and the Persian Gulf. The dust has had its highest effects on the western and central sections of Persian Gulf. As calculated from the model, the total amount of the dispersed dust was 37.58Mt, and the total amount of the laid dust on the Persian Gulf water was estimated to be 2.29Mt during the first ten days of this sand strom activity. Based on the model estimation, 62 percent of the released dust, was mostly deposited in the study area, and about 10% of the total dust concentration was deposited in the Persian Gulf. Increasing the optical depth of dust particles has reduced the heat radiation and water temperature of the Persian Gulf, both in relation to time and place. The sea surface temprature in the Persian Gulf in the western half was lower than in the eastern half. This is due to the infiltration of dust-carrying masses from the west and northwest into the Persian Gulf. In this storm, the mean optical depth of the dust particles was 0.637 and the difference between the lowest and the highest water surface temperatures was 0.74 degrees during the aforesaid period.}, keywords = {Persian Gulf,Dust Storm,thermal budget,Optical Depth,water surface temperature}, title_fa = {بررسی همدیدی توفان‌های گردوخاک مؤثر بر خلیج‌فارس (مطالعه موردی: توفان‌ گردوخاک آوریل 2013)}, abstract_fa = {در این مطالعه شرایط هواشناسی مؤثر، قبل و بعد از توفان گردوخاک در بیابان‌های اطراف خلیج‌فارس و نشر و انتقال آن به سمت خلیج‌فارس با روش‌های مشاهداتی و شبیه‌سازی با استفاده از مدل میان‌مقیاس WRF-CHEM و طرح‌وارۀ GOCART بررسی می‌شود. در این پژوهش، به طور خاص، توفان گردوخاک ماه آوریل سال 2013 در منطقه خلیج‌فارس مطالعه می‌شود. منشأ اصلی این توفان‌ گردوخاک که بر خلیج‌فارس تأثیر داشته‌ است، عمدتاً کشورهای عراق و عربستان بوده است. منشأ ایجاد این توفان تشکیل کم فشاری روی کشور اردن و حرکت آن از شمال غرب عراق به سمت جنوب شرقی آن و نزدیک شدن آن به مرکز پرفشاری در جنوب غرب ایران است که سبب افزایش سرعت باد سطحی در ایستگاه بصره عراق تا 25 متر بر ثانیه وتشکیل توده گردوخاک وحرکت بالاسوی آن بوده است. در روزهای بعد این توده گردوخاک به طرف عربستان وخلیج فارس حرکت کرده است. بیشترین تأثیر این توده بر قسمت‌های غرب و مرکز خلیج‌فارس بوده است. بر اساس خروجی مدل در مدت ده روز از زمان فعّالیّت این توفان، مقدار کل گردوخاک منتشر شده در این توفان Mt 58/37 و مقدار کل نشست آن روی خلیج‌فارس Mt 29/2 برآورد شده است. براساس برآوردهای بدست آمده از مدل، 62 درصد گردوخاک منتشر شده در منطقه مورد مطالعه نشست نموده و حدود 10 درصد از مقدار کل نشست گردوخاک در خلیج فارس بوده است. در این توفان، میانگین عمق نوری ذرات گردوخاک ./637 و اختلاف کمترین تا بیشترین دمای سطح آب در طول دوره 74/0 درجه بوده است.}, keywords_fa = {خلیج‌فارس,توفان گردوخاک,بودجه گرمایی,عمق نوری,دمای سطح آب}, url = {https://www.ims-jmas.net/article_115308.html}, eprint = {https://www.ims-jmas.net/article_115308_549713bae9ed2426cd597a4c0527346e.pdf} }